100mw lorawan node data transmission module ln610-凯时官网下载

  • ln610 is the lorawan node module. lg1301-pf/ lg1301-se are lorawan gateways. ln610 work with lg1301 to build a lorawan system. this lorawan system integrated the protocol of lorawan v1.0 , and support class c .
  • when data input to ln610, ln610 will transmit to lg1301. when received the data from lg1301, ln610 will output the received data to the series interface. all the wireless communication comply the lorawan protocol.
  • either lg1301-pf or lg1301-se can be worked with ln610.the detail of these two gateways refer to the datasheet of gateway.
附件下载

★ note: the following parameters is vcc = 3.3, with 50 ohm copper axis test instrumentation.

parameter min typ  max unite condition
working condition
working voltage range 1.8 3.3 3.6 v  
temperature voltage -40   85  
current consumption
receiving current   18   ma @vcc=3.3v
transmitting current 100 110 120 ma vcc=3.3v,tx=20dbm
sleep current   <2 3 ua cs active h
rf parameter
tx power 4 18 20 dbm  
receiving sensitivity -131 -132 -133 dbm @bw=125khz,sf=10
2nd harmonic radations   -45   dbm  
 3rd harmonic radiations   -50   dbm  

产品特点

  • lorawan protocol supported
  • uart interface
  • aes128 encryption
  • 8 channel communication simultaneously
  • configurable parameters
  • otaa & abp
  • long range & small size
  • adr
  • eu433m / eu868m / kr920m / as923m / cn780m/ cn470m / us915m / as915m

 

应用领域

  • smart city
  • smart metering ( water, electric, gas meter )
  • agricultural monitoring
  • irrigation control
  • internet of things (iot)
  • m2m
  • wireless sensors
  • wireless alarm and security systems
pin pin name type description
1 pa0 i/o reserved
2 pa1 i/o reserved
3 pa2/txled output led blinks when tx,active low
4 pa3/rxled output led blinks when data received,active low
5 pa8 i/o reserved
6 3.3v power (vcc) power supply(typical voltage)
7 gnd power (gnd) ground
8 reset input reset the module
9 pa13/swdio i/o  reserved for factory firmware upgrade
10 pa14/swclk i/o  reserved for factory firmware upgrade
11 nc    
12 nc    
13 ant antenna connect with 50 ohm coaxial antenna
14 gnd power (gnd) ground
15 gnd power (gnd) ground
16 pb8 i/o reserved
17 pb6 i/o reserved
18 pb7 i/o reserved
19 pb1/cs input 0: working mode,1: sleeping
20 pb2/set input 0: setting mode, 1: normal working
21 pa10/rxd input rxd of this module,
22 pa9/txd output txd of this module
23 gnd power (gnd) ground
24 3.3v power (vcc) power supply(typical voltage)

 

 

接口 uart
输出功率 100mw
模式 节点

联系凯时app

深圳市思为无线科技有限公司
86-755-23080616
sales@nicerf.com
深圳市宝安四十三区鸿都商务大厦a栋三楼309-314