100mw lorawan node rf module ln610-凯时官网下载

  • ln610-x1 is a lorawan node module. lg1301-pf/ lg1301-se are lorawan gateways. ln610-x1 can work with lg1301 to build a lorawan system if it has firmware inside.
  • ln610-x1 is a hardware module. it has an mcu inside but no firmware implemented. if firmware is implemented, the feature below can be supported and either lg1301-pf or lg1301-se can work with ln610-x1. the detail of these two gateways refer to the datasheet of gateway.
附件下载

note: no ldo on board, the power supply should be : 1.8 –3.6v . 3.3v is suggested .  

the following parameters is vcc=3.3v, with 50 ohm copper axis test instrumentation.

parameter min typ  max unite condition
working condition
working voltage range 1.8 3.3 3.6 v  
temperature voltage -40   85  
current consumption
receiving current   18   ma @vcc=3.3v
transmitting current 110 120 130 ma vcc=3.3v,tx=20dbm
sleep current   < 2 3 ua cs active h
rf parameter
tx power 4 18 20 dbm  
receiving sensitivity -131 -132 -133 dbm @bw=125khz,sf=10
2nd harmonic radations   -45   dbm  
 3rd harmonic radiations   -50   dbm  

产品特点

  • lorawan protocol supported
  • 8 channel communication simultaneously
  • otaa & abp
  • long range & small size
  • adr
  • eu433m / eu868m / kr920m / as923m / cn780m/ cn470m / us915m / as915m

 

应用领域

  • smart city
  • smart metering ( water, electric, gas meter )
  • agricultural monitoring
  • irrigation control
  • internet of things (iot)
  • m2m
  • wireless sensors
  • wireless alarm and security systems
pin pin name type description
1 cts2 i/o uart2_cts / gpio
2 rts2 i/o uart2_rts / gpio
3 txd2 i/o uart2_txd / gpio
4 rxd2 i/o uart2_rxd / gpio
5 nss i/o spi1_nss / gpio
6 sck i/o spi1_sck / gpio
7 miso i/o spi1_miso / gpio
8 mosi i/o spi1_mosi / gpio
9 pb0 i/o gpio
10 pb1 i/o gpio
11 pb2 i/o gpio
12 txd3 i/o uart3_txd / gpio
13 rxd3 i/o uart3_rxd / gpio
14、16、27 gnd gnd ground
15 ant antenna connect with 50 ohm coaxial antenna
17 rts1 i/o usart1_rts / gpio
18 cts1 i/o usart1_cts / gpio
19 swdio i/o firmware download / debug
20 swclk i/o firmware download / debug
21 rx1 i/o usart1_rxd1 / gpio
22 tx1 i/o usart1_txd1 / gpio
23 scl1 i/o i2c1_scl / gpio
24 sda1 i/o i2c1_sda / gpio
25 pc13 i/o gpio
26 reset input reset of mcu
28 vcc power (vcc) power supply(typical voltage)

 

maximum height: 2.7mm

 

接口 gpio
输出功率 100mw
模式 节点

联系凯时app

深圳市思为无线科技有限公司
86-755-23080616
sales@nicerf.com
深圳市宝安四十三区鸿都商务大厦a栋三楼309-314